• Gratis verzending vanaf 100 euro
  • Gratis verzending vanaf 100 euro
  • Professioneel advies
  • Fysieke 1000 m2 showroom

Direct deskundig advies? 0183 40 34 00

🡠 Terug | Home / Automotive / Powerflex / Camber Bouten / PowerAlign Camber Bolt Kit (10mm)

POWERALIGN CAMBER BOLT KIT (10MM)

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 10mm bolt.

PFA100-10 = 10mm x 70mm long, torque settings 35 lb-ft/ 47 Nm.

1 Kit nodig per auto.

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/- 1.75degs of camber change.

Simply remove the original upper bolt, loosen the lower bolt, install and adjust the PowerAlign Camber Bolt to the desired camber degree and then tighten everything to the vehicle manufacturer's torque setting.

This is an easy fix for camber issues and a perfect add-on for any suspension bush change.

The bolts are made using a 10.9 tensile, high strength material that is zinc plated to finish offering residence to corrosion. These parts are also covered under the terms of our lifetime warranty.

Merk
Powerflex
Artikelnummer
PFA100-10
Powerflex nummer
0
Aantal benodigd
1

€23,59

Incl. 21% BTW

AANTAL
Artikelnummer PFA100-10

POWERALIGN CAMBER BOLT KIT (10MM)

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 10mm bolt.

PFA100-10 = 10mm x 70mm long, torque settings 35 lb-ft/ 47 Nm.

1 Kit nodig per auto.

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/- 1.75degs of camber change.

Simply remove the original upper bolt, loosen the lower bolt, install and adjust the PowerAlign Camber Bolt to the desired camber degree and then tighten everything to the vehicle manufacturer's torque setting.

This is an easy fix for camber issues and a perfect add-on for any suspension bush change.

The bolts are made using a 10.9 tensile, high strength material that is zinc plated to finish offering residence to corrosion. These parts are also covered under the terms of our lifetime warranty.

Merk
Powerflex
Artikelnummer
PFA100-10
Powerflex nummer
0
Aantal benodigd
1

€23,59

Incl. 21% BTW

AANTAL
Artikelnummer PFA100-10

POWERALIGN CAMBER BOLT KIT (10MM)

€23,59

Incl. 21% BTW

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 10mm bolt.

PFA100-10 = 10mm x 70mm long, torque settings 35 lb-ft/ 47 Nm.

1 Kit nodig per auto.

PowerAlign Camber Bolts make non-adjustable two bolt suspension struts adjustable by up to +/- 1.75degs of camber change.

Simply remove the original upper bolt, loosen the lower bolt, install and adjust the PowerAlign Camber Bolt to the desired camber degree and then tighten everything to the vehicle manufacturer's torque setting.

This is an easy fix for camber issues and a perfect add-on for any suspension bush change.

The bolts are made using a 10.9 tensile, high strength material that is zinc plated to finish offering residence to corrosion. These parts are also covered under the terms of our lifetime warranty.

Merk
Powerflex
Artikelnummer
PFA100-10
Powerflex nummer
0
Aantal benodigd
1

AANTAL
Artikelnummer PFA100-10